Desktop My devices: control your other computer and send files
Link computers on your WidgetStore account peer-to-peer: view or control another computer and drag files over. Direct connections are free, with Tailscale support.
My devices in the WidgetStore desktop app links the computers signed in to your account into a peer-to-peer (P2P) network. From one computer you can view or control another, or drag files over — like other remote desktop apps, but only between your own devices.
- Screens, keyboard and mouse, clipboard and files travel directly between the two computers, encrypted (WebRTC). Nothing is stored on WidgetStore servers.
- Direct connections are free for everyone, with no time limit. Only when the two networks can't reach each other and traffic has to go through our relay does it cost bandwidth: 15 minutes a day free, 120 minutes a day with Pro.
- You can only connect to devices on your own account. Nobody else can ever see your computers.
Set up the computer to be controlled
- On the computer you want to reach, open My devices in the sidebar and turn on Let my other devices connect to this computer (off by default).
- On a Mac you'll see a notice: click Open Settings and, under Privacy & Security, turn on Screen Recording (so the screen can be seen) and Accessibility (so it can be controlled) for WidgetStore.
- The computer now waits for connections. You're asked every time a device connects.
Connect to another computer
- On the computer in front of you, open My devices. Your other computers appear within seconds. A green dot with "Online · ready" means remote access is on over there.
- Click Control (or View). The other computer shows a prompt: "Your device '…' wants to view and control this computer."
- First time only: the prompt shows a fingerprint. Check that it matches the fingerprint at the top of My devices on the computer you're using, then click Allow and trust this device. From then on only this device's key is accepted — a changed key is rejected.
- You're connected. The toolbar lets you:
- switch Display when the other computer has several screens;
- choose Best quality / Balanced / Smoothest (sharpness and frame rate also adapt to the network);
- Sync clipboard so copied text follows you both ways;
- send key combos such as Alt+Tab, ⌘+Tab, the Win key, Lock, Show desktop and Task Manager; between a Mac and Windows / Linux, turn on "Swap ⌘ and Ctrl" so ⌘C copies on the other side;
- go Full screen, Send files or Disconnect.
The controlled computer shows a banner at the top of the screen — "'…' is controlling this computer" — with a Disconnect button. After 10 minutes without input the session ends automatically.
Send files
- Drag files onto a device card or click Send files; while controlling, you can also drop files onto the remote screen.
- By default the other computer asks before receiving, then saves to the Downloads folder. Up to 200 MB per file.
Network: direct or relay
The device card and the top of the remote screen show which path the connection took:
| Shown | Meaning |
|---|---|
| Direct · same network | Both computers are on the same network — fastest |
| Direct · via Tailscale | Both have Tailscale and share a tailnet |
| Direct · router port mapping | We briefly asked your router to open a port (UPnP / NAT-PMP); it closes when the session ends |
| Direct · NAT traversal / IPv6 | A direct path across networks |
| Relay · reason | No direct path (for example "the other device is behind a symmetric NAT" or "UDP is blocked"); the screen goes through our relay, still encrypted |
To stay direct: put both computers on the same network, or install Tailscale on both (Tailscale addresses are used as direct paths automatically), and keep Router port mapping on. The globe icon on a device card tests the connection (network and latency only, no screen).
Security
- Only devices on the same account can connect. Each device has its own key, and the first connection must be confirmed on the controlled computer by checking the fingerprint.
- By default every connection needs Allow on the controlled computer. Unattended access (trusted devices connect without Allow) is off by default and asks you to confirm before turning on — turn on two-step verification first.
- Under Trusted devices you can turn off "Allow control" for a device (view only) or remove it; an active session ends immediately.
- "Recent remote activity" shows who connected, when and for how long.
- Web pages can't use any of this — only the desktop app's own My devices page.
Limits
- Windows: input is blocked by the system while an "Run as administrator" window or a UAC prompt is in front; Ctrl+Alt+Del is reserved by Windows and can't be sent.
- Linux: Xorg sessions can be viewed and controlled; Wayland sessions aren't supported yet (choose an Xorg session at sign-in); multiple displays are shown as one picture.
- Controlling from a phone, a remote terminal, audio and pulling files from the other computer will come in later versions.
Last updated: Nov 18, 2026